EBAY: NEW HEWITT INERTIA ENGINE-CLUTCH DYNO DYNOMOMETER

THIS E-BAY ITEM IS A CLUTCH TYPE INERTIA ACCELERATION DYNO. IT USES THE CLUTCH ON YOUR ENGINE.

CLICK HERE TO GO TO E-BAY LISTING

IT WILL COME WITH A 30 HP FLYWHEEL.  IT COMES WITH  A ADJUSTABLE HEIGHT CONTROL STAND WITH THROTTLE CABLE, KILL SWITCH & WIRING, BRAKE SYSTEM & LINES, & THROTTLE ASSEMBLY. IT WILL COME WITH A USED 4 CHANNEL  DATA ACQUISITION SYSTEM THAT HAS HEAD TEMPERATURE AND (1) NEW 14MM TEMP SENSOR.  THIS ALLOWS YOU TO MEASURE HORSEPOWER, TORQUE, ACCELERATION, HEAD TEMPERATURE, CLUTCH ENGAGEMENT, SHIPPAGE RATIO, WERE TOTAL LOCK-UP OF CLUTCH OCCURS. IT WILL ALSO COME WITH A USED DIGITAL WEATHER STATION SO YOU CAN DO MANUAL S.A.E. WEATHER CORRECTION. IT WILL ALSO COME WITH A SMALL PARTS KIT TO GET YOU STARTED, KEYS, SHIMS, CLUTCH BOLTS, BRAKE BLEEDER, ETC.  I DO HAVE A PALLETING FEE INCLUDED, WHICH MEANS, IT WILL BE BOLTED ONTO A PALLET AND SHRINK WRAPPED, THEN TOTALLY ENCLOSED IN PANELLING TO PROTECT IT DURING SHIPPING. YOU WILL NEED A FORKLIFT OR SOMETHING WITH FORKS TO UNLOAD DYNO (900 LBS). NORMALLY DYNO IS POWDER COATED A MEDIUM SILVER, MAINLY BECAUSE MY POWDER COATER DOES BEST BUY SHELVING ALL THE TIME AND THAT IS THE FASTEST IN & OUT OF THERE PLACE.  THIS DATA SYSTEM WILL WORK WITH ANY WINDOWS PROGRAM, 95′ TO VISTA. IT DOES NEED A 9 PIN SERIAL PORT OR WITH NEWER COMPUTERS WE USE A USB TO SERIAL PORT ADAPTER ($40.00). THE S.A.E. WEATHER CORRECTION CAN ALSO BE DONE THRU THE COMPUTER THRU USB PORT ALSO. THIS IS THE SIMPLEST DYNO  I BUILD. WE HAVE 108 DYNOS IN 27 STATES IN THE U.S. AND ALSO MANY FLYWHEELS AND DATA SYSTEMS CUSTOMERS I ALSO TAKE CARE OF. SEE MY BLOG FOR COMPLETE INFORMATION WWW.HEWITTSINERTIADYNOS.WORDPRESS.COM . THERE IS A LOT MORE PICTURES AND INFORMATION THERE THAT WILL HELP YOU WITH QUESTIONS OR CALL ME AT 1-641-775-3395 OR CELL 1-641-512-3395. I WILL NEED YOUR ZIP CODE TO ESTIMATE FREIGHT???????? THIS BID IS FOR THIS BASIC CLUTCH DYNO. IF YOU WANT ANY OPTIONS LIKE LARGER FLYWHEEL, DIFFERENT DATA SYSTEM, ETC. WE WILL HAVE TO ADJUST PRICE AFTER SALE OF THIS DYNO. THIS DYNO IS FOR ENGINES FROM 5 HP UP TO ABOUT 25 TO 30 HP.  DIMENSIONS OF THIS DYNO ARE 36″ X 36″. I CAN HELP YOU WITH DYNO ROOM BASICS BLUEPRINTS OR SPECS. NORMAL PRICE FOR THIS DYNO IS $4100.00 PLUS MY COST OF FREIGHT  TO SHIP IT.  E-MAIL ME FOR FREIGHT ESTIMATE, HEWITTDYNO@GMAIL.COM OR HEWITTS@NETINS.NET.  YOU WILL NEED TO SUPPLY INTERNATIONAL ANGLE OR FLAT MOTOR MOUNT AND COMPLETE COMPUTER SYSTEM. WIRING IN SHOP MUST BE GROUNDED AND I RECCOMEND A SURGE PROTECTOR.

THANKS-STAN HEWITT

AFTER MONEY IS RECEIVED, EXPECT TWO TO THREE WEEKS BEFORE DYNO WILL ARRVIE AT YOUR PLACE. THIS IS A CUSTOM BUILD DYNO AND THERE ARE MANY PARTS OF THE DYNO THAT CAN BE CHANGED AND/OR MODIFIED FOR YOUR APPLICATION, SO WE WILL BUILD TO YOUR SPECS.

Hewitt Inertia Dyno – 2001 TO 2009 “PRO” SERIES DYNO

2001 TO 2009 “PRO” SERIES DYNO

This is the number #1 selling dyno for me. The “new” 2009 models have a new synchronous belt drive system that has almost totally eliminated belt breakage. With the old 30mm belt drive, a customer could break two to three belts a month with heavy use.

The new system uses a wider Kevlar belt with larger pulleys both top & bottom.

The “new” electric start system also has been improved. We’ve went to larger battery cables. We’ve also went to a starter relay system so the starter gets more voltage and amperage. Cranking speeds have gone up 20 to 25 percent. This helps start the engine quicker. No more fast starts or clicks of the starter with the dyno turning over.

This dyno comes standard with a 25 hp flywheel. Many of you want a 30 hp flywheel for the animal Ltds & some over engines coming into popularity. The longer the dyno pull in time (seconds), the more accuracy. This dyno comes standard with a torsion shock system and a 75 hp one-way sprag clutch. An optional 100 hp sprag clutch is an available for a small optional price. We do offer another dyno with flywheels up to 49 hp that can use a one-way sprag clutch. The reason we’re going to a different flywheel is to save you money in freight costs!

The pictures highlight some of the most common used options.

This dyno normally comes with one-way sprag clutch or can be bought for about $717.00 less without sprag clutch & torsion shock system. So this dyno would be electric start direct drive.

Kart Engine Dyno – Inertia Dyno

THIS IS OUR #1 SELLING DYNO. 2001-2009 “PRO” SERIES DYNO- this dyno comes with new USB Pro data system. This dyno measures 27 ½” x 48” so it will fit thru a 28” door of your dyno room. . It has the new electric start system and the new 35mm belt drive. It comes with a small parts kit to get you started. This dyno has two separate axles and can have a sprag clutch or can be built direct drive. Normally this is bought will a pro type data system and sold with a complete computer system with printer, surge protector, all cables, etc. We would need zip code for freight estimate. We also should talk about what you want for computer system (laptop, desktop, printer, etc.)  –

$7999.00 – call me and I can give you all the details

or I can make one specifically for your needs.

~ Stan

c 641.512.3395

My Number 1 Selling Dyno – Hewitt Inertia Dyno’s

THIS IS THE #1 SELLING DYNO. 2001-2008 “PRO” SERIES DYNO- this dyno comes with new USB Pro data system. This dyno measures 27 ½” x 48” so it will fit thru a 28” door of your dyno room. . It has the new electric start system and the new 35mm belt drive. It comes with a small parts kit to get you started. This dyno has two separate axles and can have a sprag clutch or can be built direct drive. Normally this is bought will a pro type data system and sold with a complete computer system with printer, surge protector, all cables, etc. We would need zip code for freight estimate. We also should talk about what you want for computer system (laptop, desktop, printer, etc.)  – $7816.00 – call me and I can give you all the details or I can make one specifically for your needs. ~ Stan c 641.512.3395